1012-00168 ZK6831H Imported Engine Oil Filter LF3349 for YUTONG Bus

The function of the oil filter is to filter out the impurities, glue and moisture in the oil and deliver clean oil to each lubrication part. The first oil filter is installed behind the oil pump and is connected in series with the main oil passage. There are mainly metal scraper type, sawdust...

Product Details

It is believed that most vehicles owners know that the oil should be changed on time, but one of the principles to be grasped is that the new car only needs to change the oil at the end of the grinding period (1200 km), rather than at 300, 500, or 800 km.When the engine leaves the factory, the factory adds valuable abrasives, which will cause unnecessary waste if it is replaced too early.After the grinding period, the user can change the oil every 2000-3000 km, and the user can control it.But it is not possible to change the filter element without replacing the new oil.During the lubrication process of the engine, the oil is sucked out of the bottom slot by the oil pump. First, the oil filter is pressed into the oil filter element to filter.If the filter element is too dirty, the filtering effect of the oil is poor, and the amount of oil output is reduced, and all parts are not well lubricated, it will cause excessive wear and tear. Therefore, it is not possible to only change the oil again, and the oil filter element must be replaced at the same time.In addition, it is important to note that there is a small o-ring in the inner part of the filter element. When installing, it is necessary to confirm that the perforated end should be installed inward.The filter element is covered with a large o-ring and a compression spring, which is tightened after confirmation.The function of the oil filter is to filter out the impurities, glue and moisture in the oil and deliver clean oil to each lubrication part. The first oil filter is installed behind the oil pump and is connected in series with the main oil passage. There are mainly metal scraper type, sawdust filter type and microporous filter paper type. Now, the microporous filter paper type is mainly used. The fine oil filter is installed in parallel with the main oil passage after the oil pump, and mainly has two types of microporous filter paper and rotor type. The rotor type oil fine filter adopts centrifugal filtration and has no filter element, which effectively solves the contradiction between the oil passing property and the filtering efficiency.

1012-00168 ZK6831H Imported Engine Oil Filter LF3349 for YUTONG Bus


1012-00168 ZK6831H Imported Engine Oil Filter LF3349 for YUTONG Bus

宇客车配件拼图-手机号水印 (2).jpg




We are one of the leading and professional manufacturers in China with wide experience and expertise. Please rest assured to get our 1012-00168 ZK6831H Imported Engine Oil Filter LF3349 for YUTONG Bus for sale. For more info, contact us now.
Hot Tags: 1012-00168 ZK6831H Imported Engine Oil Filter LF3349 for YUTONG Bus, China, manufacturers, customized, for sale
Inquiry

You Might Also Like