HOWO Powder Material Truck.

HOWO Powder material truck is composed of special vehicle chassis, bulk powder material tank, gas pipeline system, automatic unloading device, etc. It is suitable for bulk transportation of dry materials with particle diameter no more than 0.1mm, such as fly ash, cement, lime powder, ore powder and particle alkali. It is mainly used in cement plant, cement warehouse and large construction site, which can save a lot of packaging materials and loading and unloading labor

Product Details

HOWO Powder material truck's tank structure is composed of head, variable cross-section tank and main tank. The upper and lower half of the main tank are semicircles, and the middle part is connected by a straight section. The variable cross-section is excessively used at the connection with the head. The fluidization system structure is the same as the normal straight round tank structure, and it is easy to manufacture. The main tank needs cutting, splicing, welding and overall rolling. The variable cross-section tank needs gas cutting and rolling Forming, butt joint the main can body and the variable section can body and then butt joint with the head.

One air inlet pipe is set in the front and back air chambers of bulk cement truck respectively, which can be opened and controlled separately by ball valve.The working principle of the system is as follows: the working power is led out from the automobile gearbox, and the air compressor is driven by the transmission device. The compressed air generated enters the air chamber through the control pipeline, so that the powder particles in the tank will flow. When the pressure reaches 0.196mpa, open the discharge butterfly valve to realize discharge.


CabinDriving type 6x4 LHD/RHD
HW76 Lengthen cab, single bunk, safety belts, left hand driving, air conditioner.
Overall Dimensions8182X2496X3215, 3800 mm
Wheel Base3600+1350 mm
Front axle loading capacity9000
Rear axles loading capacity2 x 16000
Type6-cylinder in line, 4-stroke, water-cooled, turbo-charged & inter-cooled, direct injection
Bore x Stroke126x130mm
Horse Power (HP)371
Emission standardEuro II
Max Speed102 km/h
Tire12.00-20, 12.00R20
TransmissionHW19710 transmission, 10 forward & 2 reverse, with PTO
Oil Tank300L
Tank Volume30CBM
Brake SystemService brake: dual circuit compressed air brake
Parking brake (emergency brake): spring energy, compressed air operating on rear wheels
Auxiliary brake: engine exhaust valve brake
ElectricsOperating voltage: 24V, negative grounded
Batteries: 2x12 V, 165 Ah
horn, headlamps, fog lights, brake lights, indicators and reverse light

HOWO Powder material truck's matters needing attention:

1. When driving bulk cement truck, do not overspeed and overpressure operation, overspeed and overpressure will seriously damage the air compressor.

2. Do not start or stop the air compressor quickly, but increase or decrease the speed slowly, otherwise, the impulse pressure will damage the air compressor.

3. Do not change the rotation direction of the air compressor, otherwise, the machine will be seriously damaged if the oil pump does not supply oil.

4. Do not stop the air compressor before reducing the pressure, otherwise, the powder material may flow back into the air cylinder, causing serious damage to the air compressor.

5.7 check and clean the oil strainer. Under normal circumstances, check and clean the machine once a quarter. If the machine has a high utilization rate, check and clean the machine once a month.

We are one of the leading and professional manufacturers in China with wide experience and expertise. Please rest assured to get our howo powder material truck. for sale. For more info, contact us now.
Hot Tags: howo powder material truck., China, manufacturers, customized, for sale

You Might Also Like