Sinotruk HOWO 6X4 18m3 Rear Load Compactor Garbage Truck 1. Compactor Garbage Truck Main Specifications: 2. Compactor Garbage Truck photos 3. Our Workshop 4. Packing: Nude packing after painting wax or according to your requirement. Shipping:By bulk cargo carrier, RORO 5. Our Advantages...
The characteristics of our compressed garbage truck: 1. Curved structure truck body, beautiful and easy to clean. 2. After the filler bottom plate and other rubbing contact parts are made of high-strength wear-resistant plates, compress garbage truck can withstand repeated friction during the garbage compression process. 3. The key components of the HOWO compressed garbage truck's mechanism running rail are all machined parts. The slider is made of high-strength nylon, the components are matched with precision, and the operation is stable. 4. The proximity switch non-contact induction switching is used to control the action of the compression mechanism, which is stable and reliable, and the energy saving effect is obvious. 5. The hydraulic system of HOWO garbage truck is a double pump double loop system, bidirectional compression, high density of garbage compression, low energy consumption and long service life of hydraulic system. 6. SINOTRUK trash truck adopts imported multi-way valve with reversing buffer function, which can realize non-impact reversing, low noise and low energy consumption. 7. Our rubbish garbage truck operating system adopts electronic control-manual dual-use, manual auxiliary operation, flexible and convenient.
The garbage compactor truck can be solved by the following methods in order to realize the drip leakage of the garbage in the process of collecting and transporting.
(1) add an edge baffle between the stuffing box and the filling device to prevent the leakage of garbage.(2) the floor board shall have a certain slope to prevent the leakage of landfill leachate.(3) install the sewerage tank on the lower part of the filler to store the leakage of sewage between the car and the plug.(4) strengthen the seal between the loader and the carriage joint to prevent the leakage of garbage and the leakage of landfill leachate during the compression process.
Sinotruk HOWO 6X4 18m3 Rear Load Compactor Garbage Truck
1. Compactor Garbage Truck Main Specifications:
Truck Model | ZZ1257N4641, Left Hand Drive or Right Hand Drive model | ||
Truck Brand | SINOTRUK -HOWO | ||
Dimension(Lx W xH) | 9565x2496x3490 | ||
Volume | 16m3/18m3 | ||
Approaching angle/Departure angle(°) | 19/26 | ||
Overhang(front/rear) (mm) | 1500/1739 | ||
Wheel base (mm) | 4625+1350 | ||
Max speed(km/h) | 75 | ||
Curb weight(kg) | 12470 | ||
Loading Weight(kg) | 25000 | ||
Fuel Tanker | 300L with locking fuel cap | ||
Fuel consumption(L/100km) | 32 | ||
Clutch | Single-plate dry clutch Φ430mm | ||
Engine | Model | WD615.47,4- stroke direct injection diesel engine, 6 cylinders in line with water cooling , | |
Horse Power, | 371HP | ||
Emission Standard | EURO II | ||
Transmission | Model | HW 19710,10 forwards and 2 reverse | |
Brake system | Service brake | Dual circuit compressed air brake | |
Parking brake | spring energy, compressed air operating on rear wheels | ||
Auxiliary brake | Engine exhaust brake | ||
Steering system | Model | ZF8098/ZF8118 hydraulic steering with power assistance | |
Front axle | HF9 | ||
Rear axle | HC16 | ||
Tire | 12.00R20, 12.00-20 | ||
Electrical system | Operating voltage | 24V,negative grounded | |
Starter | 24V,7.35KW | ||
Alternator | 28V,1500W | ||
Batteries | 2*12V.165Ah | ||
2. Garbage Compactor Truck photos