The fuel semi-trailer tanker is a tanker that is connected to the towing part by the traction head. Compared with the ordinary one-piece fuel tanker, the semi-trailer tanker can effectively improve the transportation efficiency. In the case of the same tonnage, reduce transportation costs and...
The fuel semi-trailer tanker is a tanker that is connected to the towing part by the traction head. Compared with the ordinary one-piece fuel tanker, the semi-trailer tanker can effectively improve the transportation efficiency. In the case of the same tonnage, reduce transportation costs and save fuel consumption. The fuel semi-trailer tanker is divided into two parts. The fuel tank part and the skeleton or the supporting part supporting the tank body are basically the same at the rear of the fuel semi-trailer tank truck. There are rear double bridge (two axes) and rear three bridges (three axes). select the traction head as needed. Usually referred to as the semi-trailer tanker by the brand of the traction head.
Gross Weight | About 50000KG | |
Kerb Weight | About 7500KG-12000KG | |
Loading Capacity | 30000KG-50000KG | |
Dimensions | 12000x2500x3990mm Exact size depends on the final design | |
Tank Body Shape | Optional Round or Suare | |
Total Volume | 30-60CBM | |
Tank Body Material | 5mm or 6mm/Q235 carbon steel or Aluminum alloy | |
End Plate | 5mm or 6mm/Q235 carbon steel or Aluminum alloy | |
Manhole Cover | Carbon steel or aluminum alloy API manhole cover | |
Bottom Valve | Aluminum API Pneumatic Bottom Valve | |
Discharging Valve | Diameter is 3 inch or 4 inch | |
Compartments | Optional 1 or 2 or 3 or 4 or more compartments | |
Discharging Pipe | 4'' rubber hose,2 pcs,6000mm/each | |
Axles | 13T/16T, BPW Brand or FUWA,HUJING Brand | |
Tire | 12.00R20, 11.00R20, | |
Rim | 8.5-20, 8.0-20, 9.0-22.5 | |
Suspension | Mechanical suspension | |
Spring Leaf | Width90 mm, Thinckness 13/16mm, 10 Layer | |
King Pin | JOST brand 2.0 or 3.5 inch bolts type or welding type | |
Landing Gear | Jost brand, manual operation | |
Main Beam | Weldding design or special design I beam,connected by bolts and nuts,Q345 carbon steel material | |
Brake Chamber | 4 double chamber | |
Painting | Complete Chassis sand blasting to clean rust,1 coat of anticorrosive prime,2 coats of final paint |