Fuel tank truck is a motor vehicle designed to carry liquefied loads, dry bulkcargo or gases on roads. The largest such vehicles are similar to railroad tank cars which are also designed to carry liquefied loads. Many variants exist due to the wide variety of liquids that can be transported....
Fuel tank truck is a motor vehicle designed to carry liquefied loads, dry bulkcargo or gases on roads. The largest such vehicles are similar to railroad tank cars which are also designed to carry liquefied loads. Many variants exist due to the wide variety of liquids that can be transported. Tank trucks tend to be large; they may be insulated or non-insulated; pressurized or non-pressurized; and designed for single or multiple loads (often by means of internal divisions in their tank). Some are semi-trailer trucks. They are difficult to drive due to their high center of gravity.
1.China Double Axles 40000 Liters Fuel Tanks Semi Trailer Photos
2. MAIN DESCRIPTION | |
Total Weight | 40000 kg |
Rated Load | 30000 kg |
Tare Weight | 10000 kg |
Volume | 40M 3 |
Compartment No & Valve | 4 isolated compartments with loading and unloading valves, withloading and unloading pump. |
Wheel Base | 5680+1310+1310 (mm) |
Tyre Specifications | 11.00R20, 12.00R20 |
No. Of the Tyres | 8 |
Axle Brand | FUWA (BPW optional) |
No. Of the Axles | 2 |
Axle-load | 24000 kg |
King Pin | 50#/90# |
Landing Leg | 28ton |
Pieces of leaf-spring | 10(8) |
Suspension | independent stamping steel rigid suspension (or air suspension) |
Departure Angle | 20 |
Front/Rear Overhang | 1500 mm |
Outside Dimensions (mm) | 11000X2500X3700 (LxWxH) |
(Interior )Tank shell Dimensions (mm) | 10800×2230×2050 (LxWxH) |
Material of the Main Beam | Q345B manganese plates, automatic submerged arc welded |
Brake System | Dual line braking system/ABS |
Brake Air Chamber | Four double chamber |
Electrical | 24V 7 ways(7 wire harness) |
Usage | The cargo's carrying part is tank-style designed, is suitable for the transportation of flammable liquid products |
| 1. High transport efficiency, ensuring the products will not be deteriorated in the process of transportation, saving the packing materials to reduce the transport costs. 2. Equipped with gasification bed, intake control system, and thrusting control system to ensure the pipelines unimpeded. 3. The tanks bulbar and the horizontal sextant angle are greater than the material rest angle, ensuring the discharging speed. 4. The diesel engine (air compressor unit), providing compressed air. |
Other Specifications | The sealing head of the tank shell can be torque and ellipse, and internal anti-wave plates are installed. Heat preservation organization adopts the single-layer insulation by using compressed thick glass fiber, with good presence and light weight. The internal part can be single layer or dual layer |
If you find our tapes interested, please fill the below blank space your detailed requirements. CNHTC’s team would offer different solutions to you within 12 hours. Free parts samples are also available.